REFLECTA/1

Price on request

Reflection compass binnacle
For total optical arrangement up to 3 meters
Certificate/approvals for worldwide use
Standard card height 1.200mm
Or individual rose card height
With TYPE/11 reflection/bearing compass (card Ø 180mm)
Azimuth device included
Reflection tube as CUTUBE or FIXTUBE
Optionally with optical by-pass with up to 2 meters length

More information

Customer size Horizontal by-pass / reflection tube

Accessories

Dimmers for binnacles

Course-to-steer box

Lashing rods

Order number: 100240

Description

The REFLECTA/1 is a reflective compass for worldwide navigation. It complies with the European MED ("wheelmark") approval and all important international regulations. All essential components are included:

Reflection compass
Bearing device
Reflection tube
Correctors incl. flinder rod
Emergency lighting
Emergency lighting
Mounting material
Documentation & individual certificate

A horizontal deflection channel with a maximum length of 2 metres can be used instead of the vertical reflection tube. The REFLECTA/2 must be used for deflections longer than 2 metres.

Reflection device

Optical device underneath the compass stand for reading the course in the wheelhouse at the helm.

Contains lenses and mirrors as well as the rotating mirror head with view.

The single vertical reflector tube can be designed as a CUTUBE or FIXTUBE reflector tube. The mirror head can be adjusted 150 mm in height.

A deflection is used if the helm position is not directly below the stand. In this case, the mirror head can only be extended as an extra.

CUTUBE or FIXTUBE

If data a) to g) (see dimension sheet) are not available, we recommend using the CUTUBE reflector tube. The length is 1200 mm. The tube can be shortened at the shipyard and thus adapted to the special conditions. However, if this data is known, the FIXTUBE can be cut to the final length before delivery. Please specify when ordering whether FIXTUBE or CUTUBE is required.

Deflection

The horizontal deflection channel can be up to 2 m, the total length of the optical transmission up to 3 m. The deflection channel can be orientated forwards, astern, transversely or in any other direction. REFLECTA/2 must be used for longer transmissions. The deflection must be individually adapted to the bridge design. Deflection consisting of:

Loose deck duct
Plastic channel (width 190 mm, height 160 mm) with removable cover at the bottom, containing two tilting and swivelling mirrors and a guide for deck feed-through
Reflective tube (can be extended as an extra), permanently mounted on the deflector, 120 mm tube Ø, with swivelling mirror head, containing one day and one night mirror in an adjustable holder

Height of the stand column

The compass stands can be supplied in different lengths depending on the radius of the iron clearance zone. The standard rose card height is 1200mm.

It can be customised to 910 or 1800mm.

Approvals:

MED EU
DNV-GL
RRR (Russian River Register)
RMRS Russia
CCS China
ISO25862
USCG
LR
ABS

Technical Data

MED certification:	With
Horizontal by-pass:	up to 2m
Azimuth:	With
Reflection tube:	With
Rose card height:	920, 1200, 1800
Compass:	TYPE/11

Downloads

Available downloads:

Scope of delivery

Binnacle

Made of aluminium alloy with seawater-resistant metal fittings
Access flaps for lighting, reflective optics and compensation
4x slotted holes in the foot for A-correction
Lower ring fitted with 1 pair of PTFE bearings
Enclosed hood
Electrical lighting with terminal box, lamp E14/ 40W, 230 VAC or as on-board main voltage.
Set of deck fastenings, consisting of: 4 M16 bolts, 4
Cover plates with rubber backing, 4 nuts
2x large D-spheres (Ø 180 mm) made of malleable cast iron with index mark, M16 bolts, on D-brackets with distance scale
3x pockets (in upright) with 6 B+C magnets (Ø10 mm x 200 mm)
K-magnet and K-tube in upright column, mounted with numbered adjustment chain, 1 magnet 125mm, 1 magnet 50mm
Flinders bar
Type plate with model number, approval

Optical device with reflection tube consisting of:

Lenses and holders, customised to reflector tube length
Reflective tube, length customised or as a CUTUBE that can be shortened at the shipyard
Reflection tube 1200 mm long, Ø 140 mm, with mounting flange for screwing to the deck
Rubber gasket
Flange to cover the cut-out in the ceiling or ceiling panelling
Extension device for mirror head, extension length 150 mm with clamping device and stop.
Mirror head on extension tube, Ø140 mm, 360° horizontally rotatable, with day and night mirror on 2 star handles, vertically swivelling.

Reflection compass TYPE/11