REFLECTA/3
- Reflection compass binnacle
- For total optical arrangement up to 3 meters
- Certificate/approvals for worldwide use
- Standard card height 1.100mm
- Or individual card height
- With TYPE/21 reflection/bearing compass (card Ø 160mm)
- Azimuth device included
- Reflection tube as CUTUBE or FIXTUBE
- Optionally with optical by-pass with up to 2 meters length
- Order number: 101540
-
Ready to ship appr. 1-3 workdays,
Delivery time appr. 7-14 workdays
Description
The REFLECTA/3 is a compass binnacle for worldwide travel. It complies with all national and international regulations. The rose diameter is 160 mm and the standard rose card height above deck is 1100 mm. The total length of the optical reflection transmission to the steering position in the wheelhouse is limited to about 3 metres. Horizontal deflections of up to 2 metres can be used. All necessary components are included:
- Reflection compass
- Bearing device
- Reflection tube
- Correctors
- Lighting,
- emergency lighting
- mounting material.
Approvals and applications are the same as REFLECTA/1, only the size is smaller.
Reflection device
Optical device underneath the compass stand for reading the course in the wheelhouse at the helm.
Contains lenses and mirrors as well as the rotating mirror head with view.
The single vertical reflector tube can be designed as a CUTUBE or FIXTUBE reflector tube. The mirror head can be adjusted 150 mm in height.
A deflection is used if the helm position is not directly below the stand. In this case, the mirror head can only be extended as an extra.
CUTUBE or FIXTUBE
If data a) to g) (see dimension sheet) are not available, we recommend using the CUTUBE reflector tube. The length is 1200 mm. The tube can be shortened at the shipyard and thus adapted to the special conditions. However, if this data is known, the FIXTUBE can be cut to the final length before delivery. Please specify when ordering whether FIXTUBE or CUTUBE is required.
Deflection
The horizontal deflection channel can be up to 2 m, the total length of the optical transmission up to 3 m. The deflection channel can be orientated forwards, astern, transversely or in any other direction. REFLECTA/2 must be used for longer transmissions. The deflection must be individually adapted to the bridge design. Deflection consisting of:
- Loose deck duct
- Plastic channel (width 190 mm, height 160 mm) with removable cover at the bottom, containing two tilting and swivelling mirrors and a guide for deck feed-through
- Reflective tube (can be extended as an extra), permanently mounted on the deflector, 120 mm tube Ø, with swivelling mirror head, containing one day and one night mirror in an adjustable holder
Height of the binnacle
The compass binnacle can be supplied in different lengths depending on the radius of the iron clearance zone. The standard rose card height is 1100mm.
It can be customised to 920 or 1800mm.
Approvals:
- MED EU
- DNV-GL
- RRR (Russian River Register)
- RMRS Russia
- CCS China
- ISO25862
- USCG
- LR
- ABS
Technical Data
MED certification: | With |
Azimuth: | With |
Downloads
- Download Material Declaration
- Download Supplier's Declaration of Conformity for MD
- Download MED E
- Download MED B
- Download Manual
- Download Katalog
- Download Drawing
- Download Maßblatt
- Download Questionnaire
- Download compass exchange
- Download FIXTUBE drawing
- Download CUTUBE drawing
- Download by pass catalogue
- Download DoC
Scope of delivery
Compass binnacle made of AlMg alloy with seawater-resistant metal fittings
- Access flaps for illumination, reflective optics and compensation
- 4 slotted holes in the base for A-correction
- 2 PTFE bearings mounted
- Bonnet without insight
- Electrical lighting with terminal box, E14/40W bulb, 230 VAC or as onboard main voltage.
- Electrical emergency lighting as above, 24 VDC or as on-board emergency voltage
- Set of deck fastenings, consisting of: 4 bolts M16, 4
- cover plates with rubber backing, 4 nuts
- 2 large D-balls (Ø 180 mm) made of malleable cast iron with index mark, M16 bolts, on D-brackets with distance scale
- 3 pockets (in column) with 6 B+C magnets (Ø10 mm x 200 mm)
- K-magnet and K-tube in upright, mounted with numbered adjustment chain, 1 magnet 125 mm, 1 magnet 50 mm
- Type plate with model number, approval
Optical device with reflection tube
- Lenses and lens holders, customised to reflector tube length
- Reflective tube, length customised or as a CUTUBE reflective tube of 1200 mm length that can be shortened by the shipyard, Ø140 mm mounting flange for screwing to the deck
- Rubber seal
- Lower deck flange to cover the cut-out in the ceiling or ceiling panelling
- Pull-out device for mirror head, pull-out length 150 mm with clamping device and stop 1 mirror head on pull-out tube, Ø140 mm, 360° horizontally rotatable, with day and night mirror on 2 star handles, vertically swivelling
Reflection compass TYPE/21
- Rose system Ø 160 mm
- 1° graduation for optical reading from below
- 2 steering lines,
- cover ring graduation 1°
- Centre piece for bearing attachment
- Gimbal ring with bearing bushes
- MED certificate
Bearing device for compass TYPE/21
- Swivelling slit and thread sight
- Index lines
- Swivelling azimuth mirror (black) for vertical measuring range -5° to +130°
- Shadow pencil
- Stowed in the box.